Wireless industrial remote controls are manufactured with so many varying features, and can be used for all types of mechanical devices.

1. Bulk Plant Wireless Emergency
Shutdown
Wireless industrial remote controls are manufactured
with so many varying features, and can be used for all
types of mechanical devices.

2. INTRODUCTION
In the world of technology, there are discoveries and innovations almost at every
moment. By taking advantage of this modern technology as well as scientific
improvement, so many tools and machines are being produced and invented
nowadays. Wireless industrial remotes are parts of the recent inventions of
technology today. It is used in industrial sectors in to maintain and control the huge
machines. These industrial devices are an inevitable inclusion for engineers due to
the need of high productivity as well as safety in the industrial area.
Wireless industrial remote controls are manufactured with so many varying
features, and can be used for all types of mechanical devices. Some common
applications of these remotes include Wireless industrial emergency shutdown
system, Proportional Hydraulic Controls, Aircraft Auto Refueling System, Transport
Leak Detection System, Bulk Transport Driver Authorization System, and so on. For
the purpose of this article, our emphasis will be on one of the applications of
wireless industrial remote control technology which is Wireless industrial
emergency shutdown system.

3. Wireless industrial emergency shutdown
system is established specifically to remove
all of the expensive wiring of mounted
location emergency stop switches. The
operator can set up any number of wireless
remote E-Stop switches inside the plant
facility. They will additionally communicate
with one receiver or the controller unit.
These programs are an innovation of
contemporary industrial wireless
technology and they can work in
conjunction with current, exhausting-wired,
guide E-Stop switches and plant safety
controls. One may add operator worn
emergency cease remotes to those
systems.

4. Models of the Wireless Industrial
Bulk Plant Emergency Shut-Down
Systems
Mannequin ASKF100-AC: This is a Mounted-Frequency remote E-Cease change,
used to control units within 433 MHZ by the use of double ‘A’ batteries. By
activating the E-Cease switch, the transmitter can be energized. The E-Stop
transmitters and receiver/controller shut-down does not function when the
remote E-Cease transmitter batteries are drained.
Model DSSF a hundred-AC: This is a direct sequence remote E-Stop change with
unfold-spectrum know-how which operates at 2.4GHz using a rechargeable
battery setup. The E-Stop swap and receiver/controller unit are connected by way
of Safe Link. Any lack of sign connection between the distant E-Cease swap and
receiver/controller results in an automatic E-Stop set off till the signal is
restored. Transmitters are related to a back-up power provided as the battery
pack will be active for only about seven days.

5. Remember, it is highly recommended and at same time pertinent to carry
out daily routine check on the E-Stop transmitter battery tests and also
scheduled battery replacement interval. Once the remote E-stop transmitter
power source (batteries) are exhausted, The E-Stop transmitters and
receiver or controller shut-down will NOT operate. Therefore, also check on
them to avoid disappointment when there is need for emergency
application.

6. BASE ENGINEERING Inc.
www.baseng.com
Address
600 Rothesay Ave
Saint John, NB
E2H 2H1
CANADA
Phone & Fax
Toll Free: 1.800.924.1010
Tel: 1.506.635.2280
Fax: 1.506.635.2281
Sales
sales@baseng.com
Technical Support
s.abbott@baseng.com