How to login B593, how to change IP of B593 and how to set WiFi on B593. Huawei B593 LTE 4G Router Manual. http://www.smart4gwifi.com/huawei-b593-4g-lte-cpe-modem-router.html

1. Huawei B593 LTE Router
Manual
www.smart4gwifi.com

2. • Huawei B593 4G LTE CPE Router Modem is the first 4G wireless LTE TDD FDD Broadband
CPE Router and the first LTE capable modem of the world. Huawei B593 embedded 4G
LTE modem support manufacturer rated peak download speeds up to 100 Mbps.
• Huawei B593 4G LTE Router also have many branch models in stock such as HUAWEI
B593u-12, B593s-82, B593s-42, B593s-22, etc. Here are some of the brand models of
HUAWEI B593, which support 4G LTE Frequencies as below:
• HUAWEI B593u-12: LTE FDD 800/900/1800/2100/2600MHz
• HUAWEI B593s-22: LTE FDD 800/900/1800/2100/2600MHz and TDD 2600MHz, LTE
Category 4 CPE (Speed up to 150Mbps)
• HUAWEI B593s-82: TDD 2300/2600MHz

3. Huawei B593 Login Instructions
1. Find Your Huawei B593 Router IP Address: 192.168.1.1. Put the
Internal IP Address of your Huawei B593 in the Address Bar of your
web browser.
2. Enter default username and password in the dialog box that pops
up. Username: (blank), password: admin
3. Then you can see Huawei B593 Home Screen, which looks like this:

4. Change Huawei B593 IP Address
1. Login Huawei B593
2. To change your LAN IP Address, the address you can see when
inside your home network, click the choice labeled General Settings.
Doing so opens a new list of links, pick the one labeled DHCP
Settings.
3. Configure the LAN section of your Huawei B593

5. Change Huawei B593 IP Address
• You are now on the page where you can change your home network
IP Address. Place your cursor in the box labeled IP Address under the
heading of LAN Host Settings. Enter your new address you have
chosen for your router here. We recommend using an address such as
192.168.0.1 or 192.168.1.1
• Don't change the Subnet mask or any of the DHCP Settings. The only
thing left to do is to click the Submit button down in the lower right
corner of the box.

6. WiFi Settings on Huawei B593
1. Login To The Huawei B593 and find the WiFi Settings from menu.
2. Begin on the Device Information page of the Huawei B593 router. To configure the WiFi settings, click the link
on the left side of the page labeled General Settings. Then, beneath that, pick WLAN Settings.
3. This directs you to the page you see above. In the first section titled General Settings use the drop down
menu titled Channel to be sure you are on channel 1,6, or 11. Read our guide titled WiFi Channels for more
information.
4. The next section is titled Interface Profile. In the first box, titled SSID, enter an original name for your network.
This is your network identification. It's not important what you enter here, but we recommend avoiding
personal information.
5. Next, is a box titled Maximum number of connected devices. Go ahead and enter the number of devices you
plan on allowing on your network at one time. You can enter any number from 1-32.
6. Now skip down to the Security drop down list. For the best security available with today's technology pick the
option of WPA2-PSK (recommended). Learn why this is the best when you read our guide titled WEP vs. WPA.
7. You are now asked for the WPA-PSK. This is basically asking what you want your network password to be. It is
important that you create a strong password of at least 14 characters here. The longer a password is the
stronger it becomes.
8. The last thing you may want to change is the WPA encryption. There are three choices here, TKIP, AES, or
Both. Our recommendation is AES.
9. You did it, the only thing left to do is click the Submit button.

7. Huawei B593:
http://www.smart4gwifi.com/huawei-b593-4g-lte-cpe-modem-
router.html
More Unlocked 4G LTE Modems:
http://www.smart4gwifi.com/4g-modem-router/4g-lte-usb-
modem.html
Learn more:

8. www.smart4gwifi.com