Power Tools for Clockmakers. We have everything you require to start working from motor, speed control, handpiece and accessories.

1. Power Tools & Accessories
—~
j
I
I
90 Thorncliffe Park Drive Phone Fax
PERRIN Toronto ON M4HIN5 (416) 422-4600 (416) 422-0290
H & W PERRIN E-MAIL Address: Toll Free: 1-800-387-5117 Toll Free: 1-800-741-6139
sales~perrin.on. ca

2. FORE DOM® Power TooI~~~
Rpnlcwpment Shafts & Sheaths
~1~~~~~~~
________________
________________
OUTER SHEATHS
#34.F-77 For motor series CC-DD-MM-R-RB-RM-S-TX-SR
#34.F-80 For motor series EE-GG-MMG
#34.F-82 For motor series F..JJ-JB
#34.F-83 For A series flexaides
#34.F-86 For B series flexaides
INNER SHAFTS
#34.F.-93 For motor series CC..DD-MM-R-RB-RM-S-SR-K-L-PG-TX
#34.F-96A For motor series EE-GG-MMG
#34.F-97 For motor series F-JJ-JB
#34.F-99 For A series flexa ides
#34.F-104 For B series flexaides
POWER TOOL KITS
Contains what you need to begin working...
motor, speed control, handpiece, and accessories.
Each kit contains one of our most popular combinations plus an accessory kit
at a lower cost than if purchased individually.
#34.F-2230K1T
Contains: / Model SR (1/6 HP) motor with a forward and reverse feature.
________
/ Flex shaft and sheath.
/ #30, three jaw, ball bearing hand piece (capacity 0 to 4mm)
/ Chuck key with plastic comfort handle.
I Model FCT electronic foot rheostat.
/ 54 piece accessory kit, compound and a tube of shaft lube.
/ Rotating bur and tool holder.
/ Variable speed up to 18,000 RPM
/ 2 year warranty
#34.F-2272K1T
/ Model SR (1/6 HP) motor with a forward and reverse feature.
/ Flex shaft and sheath.
/ #30, three jaw, ball bearing hand piece (capacity 0 to 4mm)
/ Chuck key with plastic comfort handle.
/ Model FCT electronic foot rheostat.
/ 84 piece accessory kit, chuck
/ Variable speed up to 18,000 RPM
/ 2 year warranty.

3. FOREDOM® ~owj~.
#34.F-10005 Handpiece and motor oil. ~
—~ ~ V V *4WU) fllh~)
~w
#34.F-1 0006 Grease for lubricating flexible shafts.
I FORF~DOM~
F~b~e Shag LL~br~c~flt
1• It~ 3
V VV< ~T
#34.F-AT-1
Handpiece and accessory tray.
#34.F-BL 1/6 hp Bench Lathe (mini polishing motor) ____________________________________
A powerful, variable speed bench lathe in a
compact size ideal for use at the workbench.
Buff, polish, deburr, clean, texture, and grind at the
speed you select without changing wheel diameters.
Product Features
/ High torque 1/6 horse power, permanent
magnet motor in sealed dust proof housings.
/ Permanent lubricated ball bearings. _____________________________________
/ Heavy duty cast iron base with 4 mounting holes.
/ Variable speed from 500 to 7,000 RPM with solid state dial control.
/ Supplied with 2 tapered spindles.
Dimensions
~ Width between spindles tips 1 3” Base 6W x 5”D Height to center of motor shaft 3 3/4”
~ Motor shaft diameter 5/16” ~ Weight 3.4 kg. ~ CSA certified
#34.F-B051 6
Convert your bench lathe into a flex shaft machine with
a 30” long “Flexade” flexable shaft assembly.
Coupling fits the 5/1 6” shaft of the bench lathe.
NOTE: Handpiece sold separately.
#34.F-CK-0 Chuck Key in a Molded Plastic Handle
The comfortable plastic handle makes accessory changes
easier and the key more difficult to misplace. Fits all
Foredom 3 jaw chuck type hand-pieces.
PERRIN 90 Thorncliffe M4H 1N5
Toronto ON Park Drive Phone
(416) 422-4600 (416) Fax
422-0290
H & W PERRIN E-MAIL Address: Toll Free: 1-800-387- ToIl Free: 1-800-741-6139
sales@perrin.on.ca 5h17

4. FOREDOM® Po~t.r T9oIs~~
#34.F-G-30 #34.F-HP72
Handpiece Grip
Standard key for all size #0
3-jaw handpiece chucks
#34.F-FCT-1
This 1/8 thick rubber Foot control in plastic housing.
cushion provides an added This solid state control gives
layer of comfort to #30 handpiece. smooth control at all speeds.
Grip slides on easily but holds firm. Our most popular model.
#34. F-SCT- 1 #34.F-TXR
Offers the same electronics Foot control in plastic housing.
and smooth control as FCT Same as FCT but for use with
but in a much heavier, cast TX high torque and
iron housing. The added TXH heavy duty motors.
weight helps keep the control in place.
#34.F-F37200 #34.F-JCA-2
Zinc die cast mini vise Arbor with chuck adjusts
-3firmly holds small work to hold accessories with
pieces for precision drilling, shanks from 0 to 5/32”. Comes with chuck key.
~ Features vertical & horizontal Fits on 5/1 6” motor shafts. Use on right hand side.
grooves in jaws plus slots in base #34.F-JCA-1 Same as above but for 1/4”
for bolting to drill press table. diameter motor shafts.
#34.F-DP3O Drill Press
A rugged and precise stand which converts your Foredom®
flexible shaft power tool into a drill press. The sturdy, all metal
stand is fully adjustable. It has a 2” throat capacity and a stroke
length up to 1 1/4”. The DP3O is designed for use with #30 & 44T
hand pieces matched with any foredom flex shaft machine.
90 Thorncliffe Park Drive Phone Fax
PERRIN Toronto ON M4H 1N5 (416) 422-4600 (416) 422-0290
H & W PERRIN E-MAIL Address: Toll Free: 1-800-387-5117 ToIl Free: 1-800-741-6139
sales~perrin. on. ca

5. FOREDOM® Power TooIs~~
#34. F-SJ 35 Soft Jaws #34.F-SJ35L Soft Jaws
Soft jaws aftach to any 3” Soft jaws aftach to any 3”
to 4” wide vise with to 4” wide vise with
magnetic strips. Cushioned magnetic strips.
pads are made of resilient Cushioned pads are
ethylene vinyl acetate that I made of leather that
grip odd shapes and prevent marking. The
prevent marking. The magnetic aftachment magnetic aftachment allows the Soft Jaws to be
allows the Soft Jaws to be installed or removed installed or removed in seconds.
in seconds.
~I~1INI~I #34.F-DCH-1
~ Dust Collector Hood
Hoods are made of heavy gauge
sheet metal construction with non
skid pads on the boftom. Has 21/21’
adapter that fits most collection
system hoses. Sold individually.
61/2” high x 4~/8” wide x 8~/8” deep Ideal for use with the BL bench lathe
3M - FX Polishing Wheels
FX polishing wheels are made of premium grade silicon carbide mineral with brightness enhancers
imbedded in a foam-like resin material. They are used for consistent, controllable finishes and
polishing of all metals. As the wheel is being used, new surface enhancers and mineral are
continuously exposed, offering unvaried finishes.
~ Dimensions 4” x 1” (100 x 25mm)
~ Recommended speed range 500 to 2000 RPM
~ Available in six different abrasive grades
~ Works on platinum, gold, titanium, precious metal clay, silver, brass, chrome-cobalt & steel
~ Runs wet or dry. Running wet can produce cooler work pieces and result in faster finishing
~ Can be used on most polishers using the tapered spindle adapter #34.F-4568
Number Grit
#34.F-FXO2 240
#34.F-FXO3 320
#34.F-FXO6 600
#34.F-FXO8 800
#34.F-FX15 1500
#34.F-FX3O 3000
#34.F-4568 Ada pter...Fiis into center of wheel to allow use
Mounting on standard tapered spindles.

6. FOREDOM® ~
#34.F-TX-TXR High Torque Flexible Shaft Machine
Model TX motor supplied with flexible shaft and TXR foot rheostat
Features: / High torque at all speeds
/ 1/3 hp ball bearing motor.
/ Operates at speeds up to 15,000 RPM.
/ TXR foot rheostat
/ Accepts all standard handpieces
/ Replaceable motor brushes / CSA certified
The TX is Foredom’s most powerful flex shaft, has permanent magnet DC
motors featuring the newest technology. These ball bearing motors have
advanced rare earth magnets in place of wound fields. This system delivers
more torque at low speed and throughout the entire speed range. It
/‘ N #34.F-SR-FCT Flexible Shaft Machine
______________________________________________________
Model SR motor supplied with flexible shaft and FCT foot rheostat
Features: / 1/8 hp ball bearing motor.
/ Operates at speeds up to 18,000 RPM.
/ Reversible _______________
/ FCT foot rheostat Handpiece sold separately
/ 39” flexible shaft
/ Replaceable motor brushes / CSA certified
Reversible SR model is especially suited for carving symmetrical and other
I
Maintenance Kits
special designs and for keeping wood dust away from the workpiece.
Contain a spare flexible shaft to replace worn or broken shafts. One pair
of replacement motor brushes, a tube of flexible shaft grease & Instructions.
#34.F-MK8 Maintenance Kit
For ball bearing models 5, SB, SM, (SR old YeHP version), SRB, SRM
#34.F-MK9 Maintenance Kit
For ball bearing models CC, DD, MM 1 15V
#34.F-MK1 0 New Maintenance Kit For all new 1/6 HP series SR, SRM, SRB motors
#34.F-MKJ 6 New Maintenance Kit For the new 1/3 HP series TX, TXM, TXB motors
#34.F-HP76 Inner Duplex Spring for Handpieces
Inner drive spring for handpieces with a flexible center section.
#34.F-HP73 Replacement outer duplex spring
for handpieces 8D, 15D, 52D
#34.F-HP74 Replacement outer duplex spring
for handpieces 7D, 1OD

7. FORE DOM® Power TooI~~,
#34.F-KIT1O #34.F-KIT2O
20 piece accessory kit includes 35 piece accessory kit includes
Steel cufters & burs, mounted Steel cufters & burs, mounted
points, wire & bristle brushes, points, wire & bristle brushes,
rubber abrasives, sanding drums rubber abrasives, sanding
& a felt bob. drums & felt bobs.
~ #34.F-WK5O #34.F-HPR15G
~ 12 piece woodcarvers assortment. Diamond tipped Pave point for special texturing
. ~ Includes aluminum oxide points, For use in power graver or any collet type
plated diamond point, vanadium hammer handpiece.
,
~ steel cufter, carving drill, 2
~ Typhoon® carbide burs, and 2 mandrels -, 3/32” Shaft notthreaded
#34.F-CHA-4 #34.F-TM-4
Collet holder with 1/4” collet. Mounts on 1/4” Tapered spindle (right hand)
motor shafts. Holds accessories with 1/4” for motors with 1/4” shafts.
shanks. Supplied with
wrench. For use on
right side.
#34.F-WM-4 #34.F-M8
Wheel mandrel for mounting stones, brushes Mandrel for use in handpiece.
and other accessories with 1/4” mounting holes Shank size is 1/8”
For motors with To hold wheels with 1/4” holes.
1/4” shafts.
#34.F-MP1 1 7P Motor brushes for models R,RB, EE, GG, MMG, & CC-230V sold in pairs
#34.F-MP1 19P Motor brushes for models CC, DD, MM-i iSV
#34.F-MP132P Motor brushes for new 1/6 HP models SR, SRB, SRM,
#34.F-MP262P Motor brushes for models BL-1, BL, BL-iA, BL-2 1i~~MA.M~
#34.F-MP3J9P Motor brushes for models L, PG, TX, TXB, TXM, TXH, TXBH, TXMH
#34.F-MP2O1 9P Motor brushes for models 5, SB, SM, (SR old ~/a HP version), SRB, SRM, H, HB, HM, K
#34. F- H P442 ColIet 3/32” for 44, 44T, 44TSJ, 44HT, CHA-4, CHA-5
#34. F- H P443 Collet 3mm for 44, 44T, 44TSJ, 44HT, CHA-4, CHA-5
#34. F- H P447 Collet 1/4” for 44, 44T, 44TSJ, 44HT, CHA-4, CHA-5
#34. F-H P600 Collet set of 4 for 8, 8D, 8SJ, 28, 28SJ, CHA-1, CHA-2
#34.F-HP6O1 CoIlet 1/32” for 8, 8D, 8SJ, 28, 28SJ, CHA-1, CHA-2
#34.F-HP602 CoIlet 1/16” for 8, 8D, 8SJ, 28, 28SJ, CHA-i, CHA-2
#34.F-HP603 Collet 3/32” for 8, 8D, 8SJ, 28, 28SJ, CHA-i, CHA-2
#34.F-HP604 Collet 1/8” for 8, 8D, 8SJ, 28, 285J, CHA-1, CHA-2
#34.F-HP1 03126 CoIlet 4mm for 25, 25H, 35, 35SJ

8. FOREDOM® Power~T9o1s~~
Handpieces _________________________
#34.F-8 Collet type chuck with slim design and chuck
guard sleeve that protects fingers when working close
and slides back when changing collets & accessories.
Comes with 3/32’ & 1/8” collets plus wrenches.
#34.F-8D Same as #8 but with a flexible duplex spring.
#34.F-1O This handpiece has a rotating lever that
releases and closes the collet for quick changes. It has
pre-lubricated ball bearings that do not require
lubrication. Holds standard 3/32” burs.
#34.F-1 OD Same as #10 but with a flexible duplex spring.
#34.F-1 5 Hammer handpiece has a reciprocating
rather than a rotary action and is used at low speed by
jewellers for sefting and decorative work. It requires
periodic lubrication. Supplied with 1 anvil point.
#34.F-15D Same as #15 but with a flexible duplex spring. ~
Axwt Point Optional Pave Point Optiona’ Carbicio Stylus
#34.F-HP1 01 77 Anvil point for hammer handpiece
#34.HPR15PT Diamond tipped pave point for
special texturing. For use on hammer handpiece.
#34.F-10212 Carbide stylus for hammer handpiece.
#34.F-18 Quick change handpiece with a slim grip
and a lever action release. Features pre-Iubricated
bearings and holds standard 3/32” burs.
#34.F-1 8D Same as #18 but with a flexible duplex spring.
#34.F-30 Most popular hand piece with pre-lubricated
0 to 4mm. Comes with key in plastic handle.
#34.F-35 Unique handpiece with a ball bearing speed
increaser that produces 2.5 times the speed of the motor.
Comes with 1/8” collet.
#34.F-44T Collet type handpiece handles accessories
up to 6.4mm. Comes with 3 collets. (3/32”, 1/8”, 1/4”)
Supplied with pin & wrench.
#34.F-52 Smooth running ball bearing handpiece with
plastic barrel & grip. Features a push/pull quick release.
#34.F-52D Same as #52 but with a flexible duplex spring.

9. FOREDOM® Power~TpoI~~
Handpieces continued
#34.F-20 Quick release handpiece
This handpiece has a rotating lever that releases and
closes the collet for quick changes. It has pre-lubricated
ball bearings that do not require lubrication. Shaped body
provide comfortable grip. Holds standard 3/32” burs.
Electric Wax Carvers
The compact control box has a precision control dial for setting
and maintaining temperatures from 95°F (35°C) up to 560°F
(294°C). Control box is only 2½” x 2” and all cords are
removable for easy storage. The handpiece is lightweight and
comfortable with cork insulation to keep fingers cool while
working. The detachable handpiece cord is also lightweight and
extremely flexible, perfect for the controlled movements needed
for fine detailing work.
* * * #21 .F-WC-1 Wax carver supplied with 3 tips.
h ~
!w
(marked with asterisk *)
~ jj
11
#21 .F-WC-3 Wax carver supplied with all 7 tips.
~
90 Thorncliffe Park Drive Phone Fax
PERRIN Toronto ON M4H 1N5 (416) 422-4600 (416) 422-0290
H & W PERRIN E-MAIL Address: Toll Free: 1-800-387-5117 Toll Free: 1-800-741-6139
sales(~perrin. oii. ca

10. FOREDOM® Po~er Tools
I
F
#34.F-AK79721 0 V ~V
Foredom® Belt Sander Attachment
All metal quality-machined device aftaches with ease over the top of a Foredom #30 hand piece
with supplied hex key. Sander has 3 permanently lubricated ball bearings. Use to power sand and
smooth metal, wood, acrylic and composite materials. Unit comes with a 180 grit belt installed and
is supplied with 3 additional belts each in grits 100 —180 240. Can be used freehand or
—
mounted into a hand piece holder for more control of the work piece.
Measures 4 7/8” long x 1 ¾” wide x 2” high.
Uses sanding belts measuring 7 x 257mm
Replacement Belts For Foredom® Belt Sander
Supplied in packages of 5 belts. Available in 3 grits (100 — 180 — 240)
#34.F-A797415 Grit 100
#34.F-A797425 Grit 180
#34.F-A797435 Grit 240
#34.F-MAHH-30
Foredom® Hand Piece Holder
This accessory allows you to bring the work piece to the tool
instead of the other way around. Some times being able
to hold the work in both hands gives an extra level of control.
Device clamps to any bench or able top up to 21/2” thick
and can be telescoped to just the right height. Hand piece
can be quickly inserted or removed. Comes with bench clamp,
rod and hand piece clamp. For use with all #30 & #44 series
hand pieces.